Fiberglass Geogrid with non woven

Fiberglass geogrid Higher strength&good package with most stable quality control

Fiberglass geogrid Introduction:Yuxin brand fiberglass geogrid are composed of fiberglass or polyester yarn coated with Bitmen,PVC,SBR.These products possess the properties of high tensile strength in the warp and weft directions,low elongation,excellent temperature range,and good anti-aging and alkali-resistance. Compared to traditional use of fiberglass geogrids can reduce construction costs,extend road service life,and prevent deflection cracks.They can also be used to reinforce roadbeds in soft soil for railways,and water dams.Geogrids woven by Dornier Weaving machines,coated with PVC.Application (1) Roadbed reinforcement of road and railway,crack prevention,increase of roadbed strength(2)Reinforcement and stabilization of riverside,embankment and side slope(3) Reinforcement roadbed in soft soil for railways and water dams.(4) Reinforcement of the surface of road and bridge.Package

 Plastic bags; PE films.Technical Data

Tensile Strength (KN)  From 30/30kn to 120*200KN

Elongation(%)fiberglass less than 3.5%, polyester less than 13%

Mesh size(mm): 12.7*12.7/25.4*25.4 or per order’s requirement

Width(m) 1-6  

Length(m) 50-300

Temperature resistant(°C) -100-280

Resin content  fiberglass more than 20%,polyester more than 30%

Coating: fiberglass bitumen/PVC/SBR, polyester SBR/PVC

Fiberglass Geogrid with non woven